DAS/RF Components

Galvanized U Bolt Assemblies Includes U Bolt, washers, locks, and nuts 2 1/2" Thread Length Minimum Order of 10  Part Number Diameter Inside Width Length  TXM...

Pre Laced Hoisting Grips Hoisting grips provide an effective means for hoisting coax cable and elliptical waveguide into position. Grips can be used to provide additional support once in place. TXM’s Pre-laced hoisting grips offer a...

19" Horizontal Rack Tapped Copper Bus Bar Kit- 3/16" x 1" x 19" - Compare to SBHB119K  Used to consolidate grounds on the equipment rack Typically used on 2-post or 4-post racks Isolators may be used to separate bar from rack if needed 35 #12-24...

TXM EP-CAP Entry Port Panel Cap One entry port panel cap per piece Vinyl Rubber Covers entry port 4" Diameter    

Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD Light Duty - PPC-20-10 Pipe to Pipe Clamps Galvanized Steel Construction   Part Number           Mounting Diameter Max       ...

HKIPBB - Isolator Bus Bar Hardware Kit - 4 Bushings and Bolts   This is a 1RU set and 1 kit will need to be ordered for each RU position you are mounting.  1 kit needed per Bus Bar This kit includes: qty 2     ...

19" Horizontal Rack Copper Bus Bar - 3/16" x 1" x 19"  Used to consolidate grounds on the equipment rack Typically used on 2-post or 4-post racks Isolators may be used to separate bar from rack if needed  Material: 3/16” (4.7mm) x...

Rack Mount Bus Bar Insulator Kit - 3/4"h x 11/16"w 1-1/4"l White  Includes 2 insulators and 4 mounting screws Part Number: HK-IB-BB

Product Description Stackable Snap-In Hanger for Coaxial Cable. Comes in packs of ten.  Part Numbers H-SS-1/2 (compare to Andrew/Commscope SSH-12)Stackable Snap-In Hanger Size: 1/2" Stackable Snap-In HangerHSS12 H-SS-1-5/8 (compare to...

Product Description Boot Assembly w/o inserts (sold separately or see our fully assembled boot kits with inserts HERE) Includes two stainless steel hose clamps Stainless steel 304 EPDM Rubber Construction For use with cushion inserts   ...

Pipe-To-Pipe Clamp Joins Two 1-1/2” to 3-1/2” OD Heavy Duty  -  PPC-30-10 Pipe to Pipe Clamps Galvanized Steel Construction Includes ACP clamp, hardware and 1/2" threaded rod Part Number       ...

Tinned Snap in ground kit with 5′ lead Snap in ground kit design PVC tape is UL listed and compliant Includes hardware kit, tape, butyl and field attached lug Dimensions Nominal Size: 1/4" to 5/8" CableConducter Length (lead): 5 ft or 60...